Agitated Filter Dryer

The Agitated filter dryer comnines two process operations, filtration and drying, in a single piece of equipment. Filtration liquid-solid separation and agitated vacuum drying allow batch manufacturing of chemical and pharmaceutical products.

Send Inquiry

Products Description

Product introduction

The design and assembly of the Agitated filter dryer are carried out strictly following national GMP requirements, and fully conforming to pharmaceutical production process requirements. The system is safe, stable and reliable.

The Agitated filter dryer materials are strictly controlled. The parts that directly contact materials are made of non-toxic and corrosion-resistant sealing material such as austenitic stainless steel(316L 304), Hastelloy, PTFE FFKM or EPDM etc. The filter screen adopts metal sintering screen made of SUS316L, C22 etc.

The interior surfaces of the equipment that directly contact materials are flat and smooth without dead comer for the convenience of cleaning and sterilizing.

parameters

Model	Filtering Area(m²)	lnside Diameter(mm)	Nomingl Volume(m³)	Filter Cake Height(mm)	Blade Lifting Height(mm)	Motor Power(kw)	Net Wwight(kg)	Total Height(mm)
GK325	0.08	325	0.04	100	120	0.37	600	2050
GK400	0.125	400	0.07	120	150	0.55	860	2550
GK500	0.19	500	0.15	140	160	2.2	1500	3000
GK600	0.28	650	0.22	180	200	2.2	1700	3300
GK650	0.3	800	0.28	180	200	2.2	1850	3400
GK800	0.5	1000	0.46	200	220	3	2250	3500
GK1000	0.8	1200	0.95	220	250	5.5	3500	3800

features

Nutsche filter dryer Features

The Agitated filter dryer dose not pollute the external environment. and the measures of dust prevention, leakage prevention, heat insulation and noise prevention are properly adopted. Under the fully closed working status, the motor, speed reducer and lifting device are protected by stainless steel outer covers, The retum duct in jacket adopts heat preservation cotton to insulate, can greatly reduce heat oss, heat exchange with the outside environment and the influence on the surroundings.

Safe and reliable explosion-proof electrical appliances are adopted. The pulleys that can eliminate static electricity and other safe interlocks and safety devices are allocated.

All the pipes of materials, solvents and nitrogen gas are designed to have no dead comer and blind pipe. The equipment surfaces are subjected to mechanical automatic fine polishing or electrolytic polishing with the interior surface Ras0 4 and the exterior surface Ra≤0.8.

The blending shaft and lateral discharging valve stem are installed with metal bellows.

360 spraying cleaning spray balls for CIP are equipped in the tank.