Tablet press maintenance tips
1, check the machine parts on schedule, 1-2 times a month, check the items for the worm wheel, worm gear, bearings, pressure wheel, crankshaft, upper and lower rail guide and other flow departments are rolling flexible and wear, found defects should be repaired in time to use.
2, a use or stop working, should pull out the remaining powder, brush the machine parts of the residual powder. If stop using for a long time, it is necessary to remove all the punching molds, and wipe the machine clean, and coat the glossy surface of the machine parts with anti-rust oil, and set it with a cloth.
3, the maintenance of the die should be placed in a special box, so that all the die number into the oil, and to keep clean, do not make rust and bruises, * can be customized special box to each of the specifications of a box, can avoid the use of the wrong load and help to dry grasp the lack of circumstances.
4 The use of the place should be cleaned often, especially for medicine and edible tablets manufacturing should not have gray sand, flying dust exists.
5, electrical components should pay attention to the maintenance, check on a regular basis, to maintain good operating conditions. Cooling fan should use compressed air to remove dust on a regular basis.
6, electrical components should pay attention to the working environment prerequisites (temperature, humidity), in a good environment, will extend the service life of the components.
7 electrical components of the maintenance, should be carried out by professional and technical staff, especially the frequency converter should be more carefully engaged in, in general, should be sent to a professional manufacturer for maintenance.
8, the electrical sector of the machine for insulation test before the need to remove all the main circuit control lines of the inverter, in order to avoid insulation test damage to the inverter. Insulation test method for inverter alone see inverter operation manual
