How does a decanter centrifuge work?

Nov 29, 2024 Leave a message

Equipment structure


 

4ea0b6a11ec5f4588438fc33ae94fb515d755e6c
 

The decanter centrifuge is mainly composed of a drum with high rotational speed, a screw conveyor with a hollow shaft and a differential speed which is the same as that of the drum and has a slightly lower rotational speed. The main motor is connected to the drum through the belt, and the vice motor drives the screw conveyor through the involute planetary gear differential to ensure that the drum and the screw conveyor keep a certain speed difference and rotate in the same direction.

 

 

 

Working principle

 

  • Material introduction: the suspension to be separated is continuously introduced into the inner cylinder of the screw conveyor from the feeding pipe, and after accelerating, it enters into the drum.
  • Centrifugal separation: the drum and the screw rotate in the same direction at a certain differential speed, generating centrifugal force. Under the action of centrifugal force, the solid phase of the material is deposited on the wall of the drum to form a slag layer due to its high density, while the liquid phase is formed into an inner liquid ring due to its low density.
  • Solid-phase discharge: the material transfer screw will deposit the solid-phase material continuously pushed to the cone end of the drum, through the slag discharge port out of the machine.
  • Liquid-phase discharge: the lighter liquid-phase material forms the inner liquid ring, which continuously overflows out of the drum from the overflow port at the big end of the drum, and is discharged out of the machine through the liquid discharge port.

 

Performance characteristics

 

  • Continuous operation: the decanter centrifuge can continuously feed, separate, wash and discharge under full speed operation, which improves the processing efficiency.
  • Strong adaptability: it is suitable for separating the suspension containing solids with a particle size larger than 0.005mm and a concentration range of 2-40%, and it is widely used in chemical, light industry, pharmaceutical, food, environmental protection and other industries.
  • Compact structure: the whole machine has a compact design, covers a small area, and is easy to install and maintain.
  • High degree of automation: modern decanter centrifuge has realized full automation control, easy to operate and reduce labor costs.

 

Influential factors and adjustment

 

  • Drum speed: appropriately increasing the drum speed can increase the centrifugal force and improve the separation effect, but too high a speed will increase mechanical wear.
  • Differential speed: the size of the differential speed will affect the processing effect. Too large a differential speed may increase the degree of disturbance to the liquid ring layer, but is not conducive to separation. Therefore, according to the nature of the material, the size of the processing capacity and processing requirements to determine the appropriate differential speed.
  • Feed flow: the feed flow will affect the residence time of the material in the machine, thus affecting the separation effect. According to the solid phase content of the material and separation requirements to select the appropriate feed flow.