Product introduction
Laboratory Spray Dryer is a device used for laboratory-scale spray drying processes in pharmaceutical, food and other research and development areas where rapid drying of materials is required. This equipment is typically compact, small in size and easy to move and clean, while providing good drying results and low energy consumption. It is capable of handling various types of liquid raw materials, spraying the feed liquid into very fine mist-like beads by means of a high-speed centrifugal atomiser, and drying it rapidly into powder or granular products after contact with hot air.
The main features of the Laboratory Spray Dryer include an automatic control system, which is capable of automatically controlling the air temperature, air inlet rate and drying time of the air inlet and outlet according to the set values. In addition, it is versatile, not only limited to spray drying, but also capable of performing a wide range of processes such as fluid bed drying, fluid bed spray granulation, evaporation concentration and pneumatic drying. This equipment is designed to meet the needs of new product development, especially for the development of expensive products, and has been widely used in universities, research institutes and enterprises.

Laboratory Spray Dryer characteristics
1. Compact design: the small size of the machine makes it easy to move and clean, while maintaining good drying results, low power consumption and raw material consumption.
2. Versatility: In addition to spray drying, it also integrates various processes such as fluidised bed drying, fluidised bed spray granulation, evaporation and concentration and pneumatic drying, which is suitable for the development of new products, especially for the development of expensive products.
3. Automatic control system: Equipped with PLC automatic control system, it can automatically control the air inlet and outlet temperature, air inlet rate and drying time according to the set value to meet the demand of new product development.
4. Efficiency and throughput: the machine excels in production recovery and throughput, especially in the early stages of research and development such as the preparation of high-value protein powders.

Product Specification
|
Handling capacity |
1500-2000ml/h |
Minimum feeding capacity |
50ml |
|
Dry chamber diameter |
¢190(mm) |
Atomization mode |
two fluid flow |
|
Inlet air temperature control |
30℃~250℃ |
Air outlet temperature control |
30℃~150℃ |
|
drying time |
0.8~1.0S |
Nozzle specifications |
The standard 0.75 mm (0.5 mm / 0.7 mm / 1.0 mm / 1.5 mm / 2.0 mm optional) |
|
Machine power (KW) |
3.8Kw |
Dimensions (mm) (L×W×H) |
1380x770x590mm |
|
Installation weight (reference) |
90kg |
|
220V/-3¢(can be customized according to different national standards related voltage |
|
Brief |
1. Atomization chamber, cyclone separator, material collection bottle and waste collection bottle are made of high borosilicate glass. |
||


Hot Tags: laboratory spray dryer, China laboratory spray dryer manufacturers, suppliers, factory




